| X-300 | Firmware update (see instructions in downloaded zip file)This firmware is available in three types, depending on your specific hardware. Carefully look at your current firmware version format while the fluxer is booting up, and then download the updated version that is in the same format.For current firmware in format “x.xx” - Download Here(If your current firmware version is NOT starting with “71-” and NOT ending with “E”.)For current firmware in format “x.xxE” - Download Here(If your current firmware version is NOT starting with “71-” but is ALREADY ending with “E”.)For current firmware in format “71x.xxE” - Download Here(If your current firmware version is starting with “71-”)For current firmware in format “71x.xxE” - Download Here(If your current firmware version is starting with “71-”. To match the rebranded color units)For current firmware in format “cMT2078x-x.xxE” - Download Here(If your current firmware version is starting with “cMT” and Instrument manufactured from March 2025 (SN- X300-2503-X and higher.) |
| X-600 | X-600 firmware update (see instructions in downloaded zip file)This firmware is available in three types, depending on your specific hardware. Carefully look at your current firmware version format while the fluxer is booting up, and then download the updated version that is in the same format.For current firmware in format “x.xx” - Download Here(If your current firmware version is NOT starting with “71-” and NOT ending with “E”.)For current firmware in format “x.xxE” - Download Here(If your current firmware version is NOT starting with “71-” but is ALREADY ending with “E”.)For current firmware in format “71x.xxE” - Download Here(If your current firmware version is starting with “71-”)For current firmware in format “71x.xxE” - Download Here(If your current firmware version is starting with “71-”. To match the rebranded color units)For current firmware in format “cMT2078x-x.xxE” - Download Here(If your current firmware version is starting with “cMT” and Instrument manufactured from March 2025 (SN- X600-2503-X and higher.) |
| 8550 ShatterBox® | ShatterBox (model 8550-xxx) firmware update — (see instructions in downloaded zip file)This firmware is available in three types, depending on your specific hardware. Carefully look at your current firmware version format while the unit is booting up, and then download the updated version that is in the same format.For current firmware in format “x.xx” - Download Here(If your current firmware version is NOT starting with “71-”.)For current firmware in format “71x.xxE” - Download Here(If your current firmware version is starting with “71-” but is ALREADY ending with “E”.)For current firmware in format “71x.xxE” - Download Here(If you have replaced the AC Drive to GS-21; required for this firmware upgrade.)For current firmware in format “cMT2078x-x.xxE” - Download Here(If you have replaced the new HMI cMT2078x; required for this firmware upgrade. This is for instruments manufactured before May 2025 (SN smaller than 2505)).For current firmware in format “cMT2078x-x.xxE” - Download Here(For instrument manufactured from May 2025 and higher (SN 2505 and higher).) |
| K1 Prime (discontinued) | K1 Prime firmware — (see instructions in downloaded zip file)All languages – Version 3.11, serial numbers starting with K1P-1603 and higher.All languages, units with Ethernet capability only – Version 3.11E, serial numbers starting with K1P-1603 and higher. (And if your current firmware version is ALREADY ending with “E”.)American and European languages - Version 2.33, serial numbers starting with K1P-1602... and smaller.Asian languages – Version 2.33, serial numbers starting with K1P-1602... and smaller. |
| K2 Prime (discontinued) | K2 Prime firmware (version 3.12) — InstructionsAll languages – Serial numbers starting with K2P-1509... and higher.American and European languages – Serial numbers starting with K2P-1508... and smaller.Asian languages – Serial numbers starting with K2P-1508... and smaller. |
